Silvakote aluminium bitumen roof coating, 5L. Reflective top coat over bitumen and torch-on waterproofing to cut heat and UV. Brush or roller over a weathered membrane.

Sika-1 waterproofing admixture, 25L. Liquid added to mortar, plaster and screed mixes to block water through the capillaries. Dilute and gauge to Sika's mix ratio, used in basements, pools and tanks.

Bitumen primer, 5L. Seals and binds surfaces before torch-on or bitumen waterproofing. Let it tack off before laying the membrane.

a.b.e. Abeproof liquid waterproofing membrane, grey, 20L. Brush- or roller-applied membrane for roofs, gutters and wet areas. Build up in coats, usually over a reinforcing fabric.

a.b.e. Silvakote aluminium bitumen roof coating, 25L. Reflective top coat over torch-on and bitumen waterproofing to cut heat and UV. Brush or roller applied once the membrane has weathered.

a.b.e. Duraflex flexible cementitious waterproofing, 15kg bucket. For slabs, balconies, wet areas and roofs. Brush or trowel applied, usually over a reinforcing membrane in joints.

Key Cote bonding coat, 5L. Brushed or rolled onto smooth concrete to give plaster and screed something to grip. Apply and let it tack before plastering.

Sika Cemflex acrylic waterproofing and bonding liquid, 5L. Mixed with a cement slurry for flexible waterproofing, or used as a bonding agent. Brush or trowel onto a prepared surface.

Torch-on waterproofing membrane, 4mm, 1m x 10m roll. Heavier bitumen membrane for flat roofs and exposed areas. Torched down over a primer, lap and seal the joints.

Torch-on waterproofing membrane, 3mm, 1m x 10m roll. Bitumen membrane heat-welded down for flat roofs and gutters. Torched to a primed surface, lap and seal the joints.

Flat digging spade. For digging, trenching and foundation work. General-purpose site spade.

Household broom for site and yard clean-up. General-purpose stiff-bristle broom.

Class 4 self-drilling screws, 12 x 85-100mm. Corrosion-rated self-drillers for fixing sheeting and steel without pre-drilling. Class 4 coating for exterior and coastal use.

Hamiltons Classic 225mm paint roller. Standard wall and ceiling roller, takes 225mm sleeves. Pairs with a roller tray or scuttle.

Hamiltons 75mm utility paint brush. General-purpose brush for walls, primers and bulk work. Everyday brush for site painting.

Bosch GSH 11 E demolition hammer for breaking concrete, screed and tile beds. Heavy-duty corded breaker, takes hex-shank points and chisels.

Makita rotary hammer drill. SDS hammer for drilling concrete, brick and masonry and light chipping. Takes SDS bits and chisels, corded.

Ladderstage working platform, 2m. Staging board for spanning between trestles or scaffold. Set on firm supports and check the span rating before loading.

Metal tool box with 165-piece tool set. General hand-tool kit in a metal case for site and workshop. Check the contents list for what is included.

225mm paint roller for walls and ceilings. Standard frame width, takes 225mm sleeves and a standard tray. Longer-pile sleeve for rough plaster, shorter for smooth.

230mm segmented diamond blade. For dry-cutting brick, block, concrete and screed with an angle grinder. Segmented rim for fast general-purpose cutting. Check your grinder takes 230mm blades.

Heavy-duty builders wheelbarrow, red. For moving concrete, sand and rubble around site. Steel tray, single front wheel.

Pine quadrant moulding, 19 x 19mm, 3.0m. Quarter-round timber for finishing internal corners and floor/skirting edges. Pin in place. Sold per length.

Pine cover strip, 8 x 44mm, 3.0m. Flat timber strip for covering board joints, gaps and edges. Pin or glue in place. Sold per length.

Timberfix Class 4 timber screws, 12 x 75-100mm. Corrosion-rated screws for timber-to-timber and decking fixings. Class 4 coating for exterior and coastal use.

76 x 50mm sawn SABS-grade structural timber, 3.6m length. Roof and framing timber for general structural work. Sold per length.

76 x 50mm sawn SABS-grade structural timber, 6.0m length. For trusses, purlins and structural framing. Sold per length.

38 x 38mm SABS batten, 6.0m. Roof battens and brandering, longer length for fewer joins. Sold per length.

38 x 38mm SABS batten, 3.6m. For roof battens, brandering and light framing. Sold per length.

76 x 50mm sawn SABS-grade structural timber, 3.0m length. For roof trusses, framing and general structural carpentry. Sold per length.

38 x 38mm SABS batten, 3.0m. Roof battens and brandering for tiling, sheeting and ceilings. Sold per length.

Rhinoglide tile adhesive, 5kg. Cement-based tile adhesive in a smaller bag for repairs and small areas. Notch-trowel application.

Jointex joint filler strip, 100 x 10mm, 2m length. Compressible filler for expansion and isolation joints in slabs and screeds. Set into the joint before sealing over the top.

Rhinoglide tile adhesive, 20kg. Cement-based adhesive for ceramic wall and floor tiles. Notch-trowel onto a sound, level base.

Porcelain tile adhesive, 12-hour, 20kg. Cement-based adhesive for porcelain and large-format tiles on walls and floors. Notch-trowel on, allow 12 hours before grouting.

Rubber insertion sheet, 8mm, 500 x 700mm. Cut gaskets, seals and pads from this reinforced rubber sheet. Trim to the shape you need.

Y12 deformed reinforcing bar, 12mm, 6m. High-tensile rebar for reinforcing slabs, columns and beams. Cut and bend to your bar schedule. Sold per length.

Duramesh galvanised crack-control mesh, 200mm wide, 10m roll. Reinforces plaster and screed over joints and chases to stop cracking. Bed into the first coat. Sold per roll.

9kg LP gas refill, cylinder swap. Exchange your empty 9kg cylinder for a filled one. Bring the empty bottle of the same type to swap.

Drinking water refill, 18.9L bottle. Refill for standard office and site water dispensers. Bring back the empty bottle to exchange.

Stainless steel woven mesh, 3.3mm aperture, 1.3m wide, sold per metre. For screens, guards, sieving and infill panels. Cut to size, edges can be sharp.

Benzine light cleaning solvent, 5L. For degreasing, thinning and cleaning brushes and surfaces. Keep away from heat and flame.

Clean-up solvent, 5L. For washing out brushes, rollers and tools after oil-based paints and coatings. Keep away from heat and flame.

Mineral turpentine, 5L. Thins oil-based paints and enamels and cleans brushes and tools. Keep away from heat and flame.

Mineral turpentine, 5L. Thins oil-based paints and enamels and cleans equipment. Keep away from heat and flame.

Lacquer thinners, 5L. For thinning lacquers and enamels and cleaning equipment. Keep away from heat and flame.

MTS clear silicone sealant, 260ml cartridge. Flexible waterproof seal for glass, frames and general gaps on non-porous surfaces. Fits a standard caulking gun.

Sika-11 FC polyurethane adhesive-sealant, grey, 600ml sausage. Bonds and seals in one for floor joints, skirtings and general construction sealing. Sausage pack for a foil gun.

Soudal Soudaflex polyurethane sealant, grey, 310ml cartridge. Flexible seal for movement and construction joints in masonry and concrete. Paintable once cured.

Den Braven Polyflex polyurethane sealant, white, 300ml cartridge. Flexible seal for movement and expansion joints in masonry and concrete. Paintable once cured.