Gutter bracket. Supports the gutter and sets its fall along the fascia. Space them to suit your gutter run. Sold each.

Hamiltons 50mm fibreglass brush. For laying resin and stippling out fibreglass and waterproofing membranes. Clean with the matching solvent after use.

Sisalation double-sided reflective foil, 1.25m x 36m roll. Sarking membrane laid under roof sheeting to reflect heat and control condensation. Lap and staple over the rafters or purlins.

Aluminium flashing, 600mm girth. For wider roof-to-wall abutments and box-gutter upstands. Dress to profile and seal the laps.

Polycarbonate IBR roof sheet, 0.8mm, sold per metre. Translucent IBR sheet for daylighting in steel roofs. Matches IBR coverage, fix through the crown.

Colorsure colour-coated roof sheet, 0.47mm, sold per metre. Pre-painted steel roofing cut to your length. Confirm the profile (IBR or corrugated) and colour when ordering.

Fibreglass reinforcing mesh. Embedded into waterproofing and crack-repair coatings to reinforce the membrane over joints and cracks. Sold per metre.

Corrugated galvanised (zinc) roof sheet, 0.47mm, sold per metre. Classic corrugated profile for roofs, fencing and lean-tos. Cut to your length, fix through the crest.

Uniflash flexible flashing tape, 250mm x 15m. Self-adhesive lead-replacement flashing for roof-to-wall and penetration details. Dress into the profile and roll down firmly.

Custom ridge/capping flashing, 460 x 460mm girth, 2.45m length. Caps a ridge or parapet to a set profile. Confirm the girth and angle suit your roof.

Springlok 700 concealed-fix roof sheet in Colonial Green, 0.53mm gauge, AZ150 coating. 700mm cover width, concealed-clip profile for low-pitch and exposed roofs. Order to your rafter length and check clip quantities.

Aluminium flashing, 450mm girth. Weatherproofs roof-to-wall junctions and penetrations. Dress to the detail and seal the laps with flashing sealant.

Rainwater gutter, 6m length. Collects roof run-off and carries it to the downpipes. Pairs with gutter brackets, outlets and stop-ends. Sold per length.

Custom-bent flashing, 175 x 60 x 320 x 40mm profile, 2.45m length. Folded to a set girth for a specific roof or wall detail. Confirm the bend sizes match your junction.

IBR galvanised roof sheet, 0.50mm, Z275 coating, sold per metre. Square-fluted IBR profile for pitched roofs. Cut to your rafter length, fix through the crown.

Hamiltons 75mm fibreglass brush. Wider brush for resin work and bedding waterproofing membranes. Clean with solvent after use.

Colorsure IBR roof sheet, Alpine White, AZ200 coating, 0.53mm gauge, 3.0m length. Standard IBR profile for pitched roofs and awnings. Fixed through the crown, order to your rafter length.

Polycarbonate IBR sheet, opal, 1.2mm, 3.0m. Translucent IBR-profile sheet for letting light into roofs and awnings. Matches standard IBR coverage, fix through the crown.

IBR galvanised (zinc) roof sheet, 0.47mm, sold per metre. Square-fluted IBR profile for pitched roofs and awnings. Cut to length, fix through the crown.