Dulux Weatherguard exterior wall paint, Dark Shore, 20L. Weather-resistant acrylic for exterior plaster and masonry. Two coats over a primed surface.

Tinted coating, Emerald Green (colour code CT 1345), 5L. Coloured paint supplied to a set tint. Confirm the base product and intended surface when ordering.

Dulux Rockgrip white PVA wall paint, 20L. Matt acrylic for interior and exterior plaster and masonry. Two coats over a primed surface.

Laminin universal undercoat, white, 5L. Smooths and seals before gloss or enamel topcoats on wood and metal. Sand lightly between coats.

Brummer Floorbright gloss floor paint, 5L. Hard-wearing finish for concrete and screeded floors, garages and stoeps. Prime bare concrete first and apply in two coats.

Laminin gloss enamel, white, 5L. Hard gloss for interior and exterior wood and metal. Over a suitable primer or undercoat, two coats.

Sigma Prime 200 two-part primer, yellow-green, 5L set. Industrial primer supplied as a mix-before-use set. Combine base and hardener to ratio and use within the pot life.

Sigma Prime 200 two-part primer, grey, 5L set. Industrial primer supplied as a set to mix before use. Combine base and hardener to ratio and observe the pot life.

Tinted coating, Golden Yellow (colour code CT 1345), 5L. Coloured paint supplied to a set tint. Confirm the base product and intended surface when ordering.

Plascon Velvaglo water-based enamel, white, 5L. Satin non-drip enamel for wood and metal with easier water clean-up and low odour. Over a suitable undercoat.

Laminin white PVA wall paint, 20L. Matt acrylic for interior plaster and masonry. Two coats over a primed surface.

Plascon Polvin white PVA wall paint, 20L. Matt acrylic for interior plaster and ceilings. Two coats over a primed surface.

Plascon Velvaglo oil-based enamel, white, 5L. Satin non-drip enamel for interior wood and metal, trims and doors. Over a suitable undercoat, clean brushes with mineral turps.

Laminin universal undercoat, white, 20L. Smooths and seals before gloss or enamel topcoats on wood and metal. Sand lightly between coats.

Dulux Rockgrip plaster primer, 20L. Seals new and porous plaster, masonry and concrete before topcoats. Brush, roller or spray. Check whether you need the water- or solvent-based version for your surface.

Sigmadur 550 two-part polyurethane topcoat, grey, 5L set (deep base). Hard-wearing industrial finish for steel and primed surfaces. Mix base and hardener, apply within the pot life.

Painters Mate acrylic gap filler, 260ml cartridge. Flexible filler for sealing gaps and cracks around trims and skirtings before painting. Paintable, smooth with a wet finger.