Cleaning rags, 5kg bag, mixed. Assorted cloth offcuts for wiping, cleaning and general site use.

Black builders plastic sheeting, 3m x 30m, 100 micron. Wider roll for damp-proofing under slabs and covering large areas. Lap and tape joints.

Crack filler, 10kg. Fills cracks and holes in plaster and masonry before painting. Mix to a paste, fill, and sand back once set.

Laminin water-based plaster primer, white, 20L. Seals new plaster and masonry before painting. Brush, roller or spray, then topcoat.

Dulux Weatherguard exterior wall paint, Dark Shore, 20L. Weather-resistant acrylic for exterior plaster and masonry. Two coats over a primed surface.

Tinted coating, Emerald Green (colour code CT 1345), 5L. Coloured paint supplied to a set tint. Confirm the base product and intended surface when ordering.

Dulux Rockgrip white PVA wall paint, 20L. Matt acrylic for interior and exterior plaster and masonry. Two coats over a primed surface.

Laminin universal undercoat, white, 5L. Smooths and seals before gloss or enamel topcoats on wood and metal. Sand lightly between coats.

Brummer Floorbright gloss floor paint, 5L. Hard-wearing finish for concrete and screeded floors, garages and stoeps. Prime bare concrete first and apply in two coats.

Laminin gloss enamel, white, 5L. Hard gloss for interior and exterior wood and metal. Over a suitable primer or undercoat, two coats.

Sigma Prime 200 two-part primer, yellow-green, 5L set. Industrial primer supplied as a mix-before-use set. Combine base and hardener to ratio and use within the pot life.

Sigma Prime 200 two-part primer, grey, 5L set. Industrial primer supplied as a set to mix before use. Combine base and hardener to ratio and observe the pot life.

Tinted coating, Golden Yellow (colour code CT 1345), 5L. Coloured paint supplied to a set tint. Confirm the base product and intended surface when ordering.

Plascon Velvaglo water-based enamel, white, 5L. Satin non-drip enamel for wood and metal with easier water clean-up and low odour. Over a suitable undercoat.

Laminin white PVA wall paint, 20L. Matt acrylic for interior plaster and masonry. Two coats over a primed surface.

Plascon Polvin white PVA wall paint, 20L. Matt acrylic for interior plaster and ceilings. Two coats over a primed surface.

Plascon Velvaglo oil-based enamel, white, 5L. Satin non-drip enamel for interior wood and metal, trims and doors. Over a suitable undercoat, clean brushes with mineral turps.

Laminin universal undercoat, white, 20L. Smooths and seals before gloss or enamel topcoats on wood and metal. Sand lightly between coats.

Dulux Rockgrip plaster primer, 20L. Seals new and porous plaster, masonry and concrete before topcoats. Brush, roller or spray. Check whether you need the water- or solvent-based version for your surface.

Sigmadur 550 two-part polyurethane topcoat, grey, 5L set (deep base). Hard-wearing industrial finish for steel and primed surfaces. Mix base and hardener, apply within the pot life.

Painters Mate acrylic gap filler, 260ml cartridge. Flexible filler for sealing gaps and cracks around trims and skirtings before painting. Paintable, smooth with a wet finger.

Donn galvanised cross tee, 1.2m, for screw-up suspended ceiling grid. Links the main tees to form the 1200 x 600 grid module. Pairs with main tees and wall angle. Sold each.

115 x 1.0mm cutting disc for steel. Thin disc for angle grinders, for clean cuts on rebar, sheet and section. Check your grinder takes 115mm discs.

2.5mm 3-core cabtyre flex cable. Flexible 3-core for appliance leads, extensions and temporary supply. Sold per metre.

Wire nails, 75mm, 1kg pack. General-purpose bright nails for timber framing and carpentry. Sold by the kilo.

2.5mm twin-and-earth cable. Standard surfix wiring for plug and socket circuits. Sold per metre.

Donn 63mm steel stud, 3.0m, for drywall partitions. Slots into matching 63mm track to frame interior walls. Pairs with track and board. Sold per length.

Armstrong Dune Supreme mineral ceiling tile for suspended grid ceilings. 1200 x 600mm lay-in tile. Drops into a standard exposed-tee ceiling grid.

OWA Constellation lay-in ceiling tile, 1200 x 600mm, box of 10. Mineral acoustic tile for suspended grid ceilings. Lay-in edge for a standard exposed-tee grid.

Donn vinyl-faced gypsum ceiling tile, 9mm, 1200 x 600mm. Wipe-clean lay-in tile for suspended grid ceilings. Drops into a standard exposed-tee grid.

OWA Constellation ceiling tile, recessed edge, 600 x 1200mm, box of 10. Mineral acoustic tile that sits with a stepped reveal in the grid. For a matching recessed-edge grid.

Iseo touch-bar panic exit device, side-locking, 1130mm, red. Single-action exit hardware for escape doors. Suits a 1130mm leaf, confirm handing before ordering.

Semi-solid hardboard door for internal openings. Standard 813 x 2032mm leaf. Hangs in a standard single-door frame.

Iseo IS60 overhead door closer, grey. Controls and closes interior and entrance doors. Adjustable closing speed, check the door weight is within the closer range.

Hollow-core hardboard door, 813 x 2032mm. Light interior leaf for bedrooms and cupboards. Hang in a standard single-door frame.

Pressed-steel door frame, 1400 x 2100mm, to suit a Class E door. Wider frame for a double-leaf or extra-wide opening. Confirm the leaf size it needs to carry.

Union cam-action overhead door closer, EN size 1-4, black. Adjustable closer for interior and entrance doors across a range of sizes. Set the power size to suit the door.

Reinforced door for heavier-duty or security openings. 875 x 2050mm leaf. Check your frame size and hinge side before ordering.

Lotus flush hardboard door, 813 x 2032mm. Smooth interior leaf for general openings. Hang in a standard single-door frame.

Geze double push-bar panic hardware. Push-bar exit device for a pair of doors on an escape route. Confirm door width and handing before ordering.

Class E door, 1336 x 2064mm, 30-minute fire rating. Interior door for openings needing a 30-minute fire barrier. Must be hung in a matching rated frame to hold the rating.

Galvanised door lock bolt, 100 x 50mm. Surface barrel bolt for securing doors and gates. Screw-fixed, pairs with a matching keeper.

Class A door and frame set, 1336 x 2068mm opening, 230mm frame. Heavier-grade door with frame for a 230mm wall. Confirm opening size and hinge side.

Meranti timber door frame, 813 x 2032mm, no cill. Hardwood frame for a standard single door, supplied without a threshold. Pairs with an 813mm leaf.

Class E interior door, 813 x 2032mm. Standard single-door leaf for general internal openings. Hang in a matching frame, check the hinge side.

Class A door and frame set, 1336 x 2064mm opening, 230mm frame profile. Heavier-grade door supplied with its frame. Confirm the wall thickness suits the 230mm frame.

Pressed-steel door frame, 877 x 2064mm, to suit a Class E door. Standard frame for a single interior door. Pairs with an 813mm Class E leaf, build into the wall as you go.

Clay maxi bricks, 7MPa non-facing plastered grade, 4000-brick load delivered to Granger Bay. Structural bricks for plastered walls. This is a delivered bulk load to a set area, confirm truck access on site.

Galvanised butterfly cavity wall ties, 205mm. Tie the two leaves of a cavity wall together as you build. Bed into the mortar joints at your specified spacing. Sold each.

Brickforce galvanised brick reinforcing, 75mm wide, 2.0mm wire, 20m roll. Laid in mortar bed joints to control cracking. Check coursing spacing to your spec.